Subscribe
Stainless Steel Coil
Stainless steel sheet, coil and strip 0.45mm to less than 5.0mm – ASTM A240M
From years of experience, Atlas Specialty Metals has determined the popular range of grades, widths and thicknesses to be held in its coil program to service customer demand. The standard national range is as follows:
| Grade | Finish | Thickness (mm) | Width (mm) |
| 304 | 2B, No. 4 PE | 0.55 | 914, 1219 |
| 304 | 2B, No. 4 PE | 0.70 | 914, 1219 |
| 304 | 2B, 2B PE, No. 4 PE, BA PE | 0.90 | 750, 914, 1219 |
| 304 | 2B, 2B PE, No. 4 PE, BA PE | 1.20 | 750, 914, 1050, 1219, 1500 |
| 304 | 2B, 2B PE, No. 4 PE | 1.50 | 914, 1219, 1500 |
| 304 | 2B, 2B PE, No. 4 PE | 1.60 | 914, 1219, 1500 |
| 304 | 2B, 2B PE, No. 4 PE | 2.00 | 914, 1219, 1500 |
| 304 | 2B, 2B PE, No. 4 PE | 2.50 | 914, 1219, 1500 |
| 304 | 2B, 2B PE, No. 4 PE | 3.00 | 914, 1219, 1500 |
| 304L | 2B, 2B PE | 4.00 | 1500, 2000 |
| 316 | 2B | 0.55 | 1219 |
| 316 | 2B | 0.70 | 1219 |
| 316 | 2B | 0.90 | 1219 |
| 316 | 2B, No. 4 PE | 1.20 | 1219 |
| 316 | 2B, No. 4 PE | 1.50 | 914, 1219, 1500 |
| 316 | 2B, No. 4 PE | 1.60 | 914, 1219, 1500 |
| 316 | 2B, No. 4 PE | 2.00 | 914, 1219, 1500 |
| 316 | 2B, No. 4 PE | 2.50 | 914, 1219, 1500 |
| 316 | 2B, No. 4 PE | 3.00 | 914, 1219, 1500 |
| 316L | 2B, 2B PE | 4.00 | 1500, 2000 |
| 430 | BA PE, No. 4 PE | 0.70 | 914, 1219 |
| 430 | BA PE, No. 4 PE | 0.90 | 914, 1219 |
| 3CR12 | 2B | 1.20 | 1250 |
| 3CR12 | 2B | 1.60 | 1250 |
| 3CR12 | 2B | 2.0 | 1250 |
| AtlasCR12Ti | No. 1 | 3.0 | 1250, 1500 |
| 3CR12 | No. 1 | 4.0 | 1250, 1500 |
Other grades and widths available, but not always ex-stock.
Grades: 301L, 310, 321, 2205, 253MA.
Widths (mm): 600, 750, 900, 1050, 1200, 1524.
Grades: 301L, 310, 321, 2205, 253MA.
Widths (mm): 600, 750, 900, 1050, 1200, 1524.
Product outside the standard range can be indented from overseas mills or stocked by special arrangement.
*Through our processing facilities any length up to 15000mm can be produced.
Fixed billing weights for flat rolled stainless steel
|
Thickness (mm) |
Austenitic nominal mass (kg/m²) |
Ferritic nominal mass (kg/m²) |
|
0.45 |
3.68 |
|
|
0.55 |
4.50 |
|
|
0.70 |
.72 |
|
|
0.90 |
7.36 |
|
|
1.20 |
9.81 |
9.61 |
|
1.50 |
12.3 |
|
|
1.60 |
13.08 |
12.85 |
|
2.00 |
16.35 |
16.02 |
|
2.50 |
20.44 |
20.03 |
|
3.00 |
24.53 |
24.04 |
|
4.0 |
32.71 |
32.06 |
Austenitic stainlesss steel based on 8177kg/m³
Ferritic stainless steel based on 8000kg/m³
Ferritic stainless steel based on 8000kg/m³
Actual weights may vary from the above due to specific grade and dimensional tolerances.
